![background image](http://html.mh-extra.com/html/vax/pickup-pet-cvrav013/pickup-pet-cvrav013_lets-get-started_856869009.webp)
Taking care of your machine
Cleaning the pre-motor filter
Remove dirt container
by pushing down the dirt
container release button
and lifting the dirt container.
Hold the dirt container and
twist the lid anti-clockwise.
Tap the pre-motor filter
against a bin to remove
any dirt/debris.
Leave to dry for 24 hours or
until fully dry before placing
back in the machine.
Rinse the pre-motor filter
under water (max 40°C).
TA
P
MAX
40˚C
!
MAX
40˚C
24hr
Lift the lid to reveal the
pre-motor filter.
Hold the dirt container over a
bin. Press the dirt release clip
at the bottom of the container,
the dirt release door will open
allowing dirt/debris to fall out.
Lift out the pre-motor filter.
Emptying and cleaning the dirt container
IMPORTANT:
Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
Check the pre-motor filter every time you empty the dirt container and tap against a bin to remove dirt/debris if
required.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off.