background image

Safety Guide

 

This machine is intended for household use only, not for commercial or industrial use. 

Please keep instructions for further use and only as instructed in this guide. 

The full user guide can be found at: 

support.vax.co.uk

Don’ts

• Don’t leave the charger plugged in when unattended. 

• Don’t use the machine if it is faulty or has been dropped, damaged or left outdoors. 

• Don’t use the machine to pick up any flammable or combustible materials (lighter 

fluid, petrol, kerosene etc.) or use the machine in an area with explosive vapours 

or liquid. 

• Don’t use the machine to pick up hot coals, cigarette butts, matches or smoking 

hot burning items or use in an area where there may be harmful fluids (chlorine, 

bleach and ammonia drain cleaner). 

• Don’t handle the charger, battery or use the machine with wet hands. 

• Don’t unplug the charger by pulling on the power cord. 

• The power cord cannot be replaced. If the cord is damaged the charger should be 

scrapped. 

• Don’t attempt to remove blockages with sharp objects as this may cause damage 

to the machine. 

• Don’t use the machine with the incorrect battery or charger as this may result in 

damage or injury to the user. The correct battery charger information is listed on 

the battery pack ratings label. 

• Don’t charge the battery outdoors, or leave the charger connected to the mains 

when not in use. 

• Don’t use the machine with a damaged battery. If the battery is damaged contact 

us on: 

08000 927737

• Don’t use on a surface that is damaged, uneven or incorrectly fitted.

• The brushbar in the powered floorhead constantly rotates when activated. Never 

use on one spot for any prolonged period of time as this may damage the floor 

surface. 

Do’s

• Check suitability with the manufacturer of your flooring prior to using the machine.

• Only VAX ONEPWR batteries (BV15030, BV25040, BV15020, BV25030) and 

chargers (BV05100UK, BV05200UK, BV05115UK) should be used  with this 

machine.

• Always place the charger on a stable, level surface, uncovered and away from 

any heat source.

• Only VAX ONEPWR recommended tools and accessories should be used with this 

machine. 

CLSV-VPKS

CLSV-VPKA

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK

VAX Pace

Содержание ONE PWR Pace



















Отзывы: