manualshive.com logo in svg

Vax ONE PWR Pace, Руководство пользователя

Поделиться
Скачать
Vax ONE PWR Pace Скачать руководство пользователя страница 17

15

Troubleshooting

There is an accessory missing

•   Check the contents on the box to make sure the part is definitely included with your machine.

Why does the machine have no power?

•     The battery is not fitted correctly. 

See Operation page 7.

•     The battery has no charge. 

See Charging the battery page 6.

•     The motor thermostat may have tripped. Empty the dirt container and check for blockages. Clean the filters and allow the 
    machine to cool for approximately 1 hour. If you have washed the filters, wait 24 hours to fully dry before placing back on 
       the machine. 

See Cleaning the filter and separator page 11.

•     The brushbar motor sensor in the powered floorhead or mini motorised pet tool has been activated. To reset remove the 

powered floorhead/tool from the reach wand/handheld and clear any obstruction. Wait 1 minute before refitting the powered 
floorhead, switch the machine on and press the brushbar ON/OFF button to reactivate the brushbar. 

See Operation page 8.

Why won’t the machine pick up?

•     The dirt container may not be fitted correctly. 

See Removing and refitting the dirt container page 10.

•     The dirt container may be full or blocked. Check the dirt container and handheld inlet for blockages.
    

See

 

Emptying the dirt container page 10 and Checking for blockages page 14

.

•     The filters may be clogged or need replacing. 

See Cleaning the filter and separator page 11.

•     There may be a blockage. 

See Checking for blockages page 14.

•     The brushbar on the powered floorhead has not been activated. 

See Operation page 7

.

•     The powered floorhead may be blocked. 

See Removing and cleaning the brushbar page 12.

•     The machine, powered floorhead and reach wand may not be correctly fitted.

 See Assembly page 5.

Why is there a red light?

•     Battery charge is running low (<20%). 

See Charging the battery page 6.

Why won’t the brushbar in the powered floorhead or pet tool turn?

•     The brushbar in the powered floorhead or mini motorised pet tool has not been activated. 

See Operation page 7.

•     The tool/brushbar may be obstructed. 

See Removing and cleaning the brushbar page 12 and Removing and cleaning the mini 

motorised pet tool brushbar page 13.

•     The machine, powered floorhead, reach wand and mini motorised pet tool may not be correctly fitted. 

See Assembly page 5.

WARNING: Always switch off and unplug the machine before performing any checks or maintenance.

Содержание ONE PWR Pace



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды