www.vax.co.uk
10
general maintenance
8. General maintenance
WARNING:
to reduce risk of injury from moving
parts - unplug before servicing.
Debris removal/hose
Debris removal/nozzle guard
• Check to see if dirt container is full; empty if needed.
• Plug cleaner in and check to see if there is any suction
at end of hose. If there is no suction at the end of hose,
follow these steps:
1. Unwrap hose from caddy. Twist and unlock to remove
clogs. Clean out hose with a broom handle. Check access
door on back of cleaner (near hose end). Remove the
seven (7) screws and check for obstruction (Fig.8/1).
2. Remove dirt container (Pg. 6) and check dirt container
inlet located on cleaner (Fig.8/1).
3. Remove nozzle guard (see Fig.8/2) by removing the
three (3) screws. Remove obstructions (Refer to Page 8
for belt and brushbar removal and replacement).
Debris removal/Turbo Tool
Rotate locking ring 180
o
and turn Turbo Tool over.
Pivot lower housing and remove clog.
To reassemble, be sure tabs are engaged. Pivot the lower
housing closed.
Rotate locking ring back round to secure.
Fig.8/1
Fig.8/2
LOCKING RING
Fig.8/3
Fig.8/4
Fig.8/5
!
All manuals and user guides at all-guides.com
