![background image](http://html.mh-extra.com/html/vax/mach-5-vzl-7015at/mach-5-vzl-7015at_instruction-manual_856828008.webp)
vax.co.uk
8
clearing blockages / storage
To re-assemble, and replace the bottom plate, insert the
four tabs on edge of bottom plate into slots on front of
tool. Pivot bottom plate down and snap closed (Fig.7/3).
Removing debris from the TurboBrush
The brushbar will stop rotating if it is blocked during
operation by vacuuming up foreign objects, or if strands of
carpet are wrapped around it.
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Lay the TurboBrush floor head on a flat surface and turn
over to expose the brushbar. Using a pair of scissors, cut
through any threads or hairs caught by the brushbar that
have wrapped around the guides (Fig.7/4).
8. Storage
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet and rewind the power
cord as directed before storing.
NOTE:
Always store the vacuum cleaner base down.
Fig.7/3
!
Fig.7/4
VZL-7015AT Mach5 All Terrain UG.qxd:User Guide 24/3/09 17:38 Page 8