9
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
belt or brush bar replacement
8. General maintenance
WARNING: To reduce risk of injury from moving
parts - unplug before servicing.
Debris removal/nozzle guard
• Check to see if dirt container is full; empty if needed.
• Plug cleaner in and check to see if there is any suction
at end of hose.
1. Unwrap hose from caddy. Twist and unlock to remove
clogs. Clean out hose with a broom handle. Check access
door on back of cleaner (near hose end). Remove the
seven (7) screws and check for obstruction (Fig.8/1).
2. Remove dirt container (page 6) and check dirt
container inlet located on cleaner.
3. Remove nozzle guard by removing the three (3) screws.
Remove obstructions (refer to page 8 for belt and
brushbar removal and replacement).
Debris removal/TurboTool (some models only)
Rotate locking ring 180
o
and turn TurboTool over
(Fig.8/3).
Replace sole plate onto base of cleaner. (Fig. 6/7).
Replace all six (6) screws to secure nozzle guard (Fig.6/8).
Fig.6/8
Fig.6/7
Fig.8/2
Fig.8/1
!
LOCKING RING
Fig.8/3
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 9