![background image](http://html1.mh-extra.com/html/vax/mach-2-series/mach-2-series_instruction-manual_4124589005.webp)
5
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
how to operate
Floor/Carpet Cleaning
Move the handle and adjust it to the desired position for
(a) storing the upright, (b) operating the cleaner, and (c)
de-press the handle release pedal again to clean under
furniture. NOTE: Brushbar could cause rug fringe area to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
Using the Accessories
Cleaner must be in its upright position to raise brushbar.
Turn carpet height adjuster to long carpet pile setting
(Fig.4/5).
Remove the lower hose from the base of the cleaner and
the upper hose from the hose caddy (Fig.4/6).
Accessories can be attached to the hose end or the end
of the extension wand (Fig.4/7).
Simply push the attachment
firmly onto the end of the
extension wand. To remove
tool, twist and pull apart
gently (Fig.4/8).
The TurboTool is ideal for
lifting pet hair off carpets,
stairs and upholstery. The
TurboTool is most effective
when using backward
strokes over the area that is
being cleaned .
Hard floor tool:
(available
on some models only) Use
on hard surface floors. Only
attach to extension tube.
Carry Handle
Use the carry handle located
on the top of the dirt
container lid to move the
cleaner from room to room
(Fig.4/9).
Fig.4/5
Fig.4/6
Fig.4/7
Fig.4/8
Fig.4/9
Fig.4/4
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 5