Place ingers under the
catch of the bin to dirt
container lid and pull to
release it.
Press dirt container
release button to remove
the dirt container.
T A
P
24hr
MAX
40˚C
Cleaning the shroud
Cleaning the post motor ilter
Cleaning the pre-motor ilter
Taking care of your machine
Taking care of your machine
Press dirt container release
button to remove the dirt
container.
Place ingers under the
catch of the dirt container
lid and pull to release it.
The lid will lift on a hinge.
Remove the pre-motor
ilter to allow access to
the shroud.
Remove the exhaust cover
by turning it counter clockwise
and lifting it of. To ind the
post-motor ilter.
Use the tab on the ilter to
pull the ilter out of
it’s housing.
Tap the shroud over the
bin to release dirt.
Tap the ilter over a bin
to release dirt.
Wash the shroud under
running water and leave
to dry. The shroud will need
to be placed back correctly.
Hold the dirt container over a bin
and unclip the lock on the bottom
of the dirt container, allowing the
dirt to fall out.
Close the base of the dirt
container and click the dirt
container back on to the
back panel.
Emptying and cleaning the dirt container
MAX
40˚C
24hr
Wash the ilter under running
water (40 degree max).
Remove the ilter.
Leave to fully dry for a least
24 hours before placing back
in the machine.
Tap the post-motor ilter
over a bin to release the dirt.
Then replace before using
your vacuum.
Always switch of and unplug the
vacuum cleaner before carrying
out any maintenance.
WARNING
