Getting to know your appliance
Getting started
Filling the water tank
With the iron disconnected
from the mains open the
water fill cover.
Tilt the iron forwards.
Using the jug provided fill
the water tank up to the
Max fill line.
Close the water fill cover.
Before you begin
CAUTION:
The soleplate becomes very hot during use. Always allow the iron to cool down before carrying out any
maintenance or trouble shooting. Do not use hot or boiling water to fill the water tank. Don’t over fill the water tank
or exceed the maximum amount required. Always unplug from the mains before topping the tank up with water.
Always switch off the iron and allow to cool before emptying the water tank.
IMPORTANT:
When using the iron basic safety precautions should always be observed.
Don’t aim the steam jet at people, animals, plants and electrical components or wires. Never touch the steam jet
(there is a risk of scalding).
Before first use remove labels and all packaging.
Always make sure the water fill cover is closed correctly before use.
NOTE:
The iron can be filled with tap water. For hard water areas we recommended the use of distilled or
demineralised water. Half fill the water tank with distilled or demineralised water and top up to the ‘Max’ line
with tap water.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals to the water tank.
When filling make sure the appliance is unplugged.
Technical Specification
Name
Power Shot
Model number
ICC1V1EP
Power input
Please refer to rating label
Tank capacity
300ml
Weight
1.1kg
Subject to technical change without notice.
Steam boost button
Heating Indicator Light
Self clean button
Water tank
Spray burst button
Steam control
Soleplate
Power cord
Handle
Temperature
control dial
Spray
burst nozzle
Water fill cover
