This steam mop is intended for household use only and NOT
for commercial or industrial use.
IMPORTANT: Please refer to floor manufacturer’s care recommendations
before use and test the steam mop on a discrete area of flooring to
begin with.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
When using the steam mop, basic safety precautions should always be
observed, including the following:
WARNING: The stick steam mop head gets very hot
during operation.
WARNING: Danger of scalding
1. Do not leave the steam mop unattended when plugged in.
Unplug the product from the socket when not in use.
2. Only use the steam mop indoors. Keep the steam mop
away from rain and moisture.
3. Turn off the on/off switch on the steam mop controls before
disconnecting or connecting from the mains supply.
4. Always unplug the steam mop and allow it to cool before
connecting or disconnecting the hose or accessories.
5. Children should be supervised to ensure that they do not play
with the appliance.
6. This appliance is not intended for use by children under eight
years of age and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use
of the appliance in a safe way and understands the
hazards involved.
7. Cleaning and maintenance shall not be made by children
without supervision.
8. The appliance should only be used as described in the quick start
guide or in the full online user guide.
9. Only Vax recommended attachments should be used with
this appliance.
10. Do not use this steam mop if it has been dropped, damaged,
left outdoors or dropped into water. Do not use this steam mop with
a damaged cord or plug. If the supply cord is damaged return the
steam mop to a Vax authorised Service Agent or a suitably qualified
person for examination, repair or adjustment.
11.
Do not pull or carry this appliance by the cord. Do not use the
cord as a handle, close a door on the cord or pull the cord around
sharp edges or corners. Do not run the steam mop over the cord.
Keep the cord away from heated surfaces.
12. Do not unplug the product by pulling on the cord.
13. Do not handle the plug or the steam mop with wet hands.
14. Do not use without the tank cap in place. Ensure that the water
tank cap has been screwed down fully before use.
15. Do not touch any hot areas on the steam mop. It is normal for
the steam mop to heat up during operation.
16. Accessories will become hot during use – allow them to cool
down before handling.
17. Do not use the steam mop to treat any items of clothing that
are still being worn on the body.
18. The force and heat of the steam may have an adverse effect on
some materials. Always check whether a surface is suitable for
treatment with the steam by carrying out a test before hand on a
concealed area.
19. The steam mop must be kept level during operation.
20.Never immerse the steam mop in water or in other liquids.
21. Do not operate the steam mop without water in the tank.
Always top up with water in good time.
22. Always remove the mains plug from the socket and allow the
steam mop to cool down completely before topping up
with water.
23. Never aim the steam mop at people, animals or plants (there
is a risk of scalding). Never touch the steam jet from a short
distance with your hands. Do not aim the steam mop at
electrical items or wires.
24. Keep hair, loose clothing, fingers and all parts of the body away
from openings.
25. Never fill the water tank with anything other than water. Never
put additives (such as perfume, stain remover or products
containing alcohol) in the water as they may damage the steam
cleaner or make it dangerous to use.
26. Only carry the steam mop by the carry handle.
27. Store the steam mop in a cool, dry area.
28. Do not use an extension cord with this product.
29. Using improper voltage may result in damage to the steam
cleaner and possible injury to the user. The correct voltage is
listed on the rating label.
30. Do not use your steam mop if it is damaged or faulty. Please
make sure that the product is unplugged from the mains and call
the Vax Careline on 0844 412 8455.
31. Do not use the unit on leather, wax polished furniture or floors,
synthetic fabrics, velvet or other delicate steam or water
sensitive materials.
32. Do not use on acrylic surfaces.
33. In wet rooms, e.g. bathrooms, connect the appliance to sockets
with an RCD adaptor connected in series.
34. The device should not be used to clean electrical appliances
such as ovens, microwaves, televisions and electrical heating
systems etc.
35. Be very careful when cleaning tiled walls with sockets.
36. Keep the unit on the floor.
37. Empty the water tank when the steam mop is not in use.
38. Do not overfill the tank. Do not exceed the maximum prescribed
filling level. Please use the measuring jug and funnel included.
39. Always show these instructions to a third party if you are passing the
steam mop on to them.
40. Please ensure all parts are correctly fitted before using the product.
41. Do not attempt to remove blockages with sharp objects as they may
cause damage.
42. Do not use without the hard water filter in place.
43. Take extra care when cleaning on the stairs.
44. Keep cleaning area well lit.
45. The appliance has to be unplugged after use and before cleaning or
user maintenance of the appliance.
43. Liquid or steam must not be directed towards equipment containing
electrical components, such as the interiors of ovens.
WARNING:
Always switch off and unplug the steam mop from the
electrical outlet before assembling, opening or empting the water tank, or
before connecting/disconnecting the attachments.
IMPORTANT:
The liquid or steam must not be directed towards equipment
containing electrical components, such as the interior of ovens.
IMPORTANT:
The steam mop is equipped with a thermostat and a thermal
cut-out. If for any reason the unit should overheat, the thermostat will
automatically turn the unit off. Should this occur, unplug the steam mop
from the electrical outlet and turn off the switch. Let the unit cool, remove
and empty the water tank. To re-start the machine, plug it into an electrical
outlet and switch it back on.
General Safety Information
vax.co.uk
3
S3S-U series UG - 15.08.13_User guide 29/08/2013 10:15 Page 3
