• Check the ‘This pack contains’ panel on the box to make sure
the part is included with your machine.
• The nozzle or tools may be blocked, check for blockages and remove.
• The dirt container may not be correctly fitted, remove the dirt container
from the machine and check it’s assembled correctly and refit ensuring
it’s locked into place.
• The filter may be clogged, clean or replace the filter. Go to ‘Taking care
of your machine’.
• The dirt container may be full, empty the dirt container. Go to ‘Using
your machine’.
• The battery charge is getting weak, let the battery run until it stops
and recharge.
• The charger lead may not be fully inserted into the back of the
handheld, check the charger and insert correctly.
• Check the charger is plugged into the mains and power is switched on.
• Charger plug or lead is damaged contact Vax customer service
on 0330 026 8455.
• Recharge battery, go to ‘Getting started’.
• The unit may have been in the ‘on’ position when charged – move the
power switch to the ‘off’ position and charge again.
Solution
Problem
What to do if it goes wrong
Getting in touch
There is an
accessory missing
Why won’t the
handheld pick up?
There is no power
Why won’t the battery
recharge?
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.
