Carrying your 2-in-1 vacuum cleaner
Getting started
Line up handle with main
body and lower into place.
Insert crevice tool
into holder.
Fit the battery onto the vacuum cleaner
(below the crevice tool holder).
The battery will click into position when correctly fitted.
Use handle to carry as a
upright vacuum cleaner.
Insert screw through
crevice tool holder.
Line up crevice tool holder
onto back of handle.
Line up nozzle of handheld
onto edge of lower main body.
Use handle to carry
as a handheld vacuum cleaner.
Using a crosshead screw
driver tighten screw, until
crevice tool holder and handle
are secured into place.
Push hand held into main
body until it clicks into place.
Assembling your 2-in-1 vacuum cleaner
CAUTION:
Always make sure the pre-motor filter is correctly fitted before using the vacuum cleaner.