Cleaning the post motor filter
Cleaning the separator
Storing your vacuum cleaner
Wrap the power
around the quick
cord release hooks.
Press handle
release button.
Lower handle
downwards.
Press post motor
filter cover clip, pull
to remove.
Turn separator
anti-clockwise
to ‘unlock’, pull
to remove.
Remove any dirt/
debris. Rinse under
water (max 40°C).
Using a soft brush
clean any dirt/debris
out of the separator.
Remove post
motor filter.
Tap separator over
a bin to remove any
dirt/debris.
Leave to dry for 24
hours or until fully dry
before placing back in
the vacuum cleaner.
24hr
Always use the carry
handle to lift and carry
the machine.
Line up tabs on
separator with dirt
container, turn
separator clockwise
to ‘lock’ and click
into place.
The separator
should sit on seal
in bottom of dirt
container when
correctly fitted.
Taking care of your machine
Taking care of your machine
Press the dirt container
release button, pull to remove.
Emptying the dirt container
Cleaning the HEPA pre-motor filter
Hold dirt container
over a bin.
Press the dirt release clip,
allowing dirt/debris to fall out.
Turn the dirt container
release button, pull
to remove.
24hr
Leave to dry for
24 hours or until
fully dry before
placing back in the
vacuum cleaner.
Turn the HEPA
pre-motor filter
anti-clockwise,
pull to remove.
Tap HEPA pre-motor
filter over a bin to remove
any dirt/debris.
Rinse under water
(max 40°C).
Line up HEPA
pre-motor filter tabs
in dirt container lid,
turn clockwise until it
clicks into place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat,
the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the
machine for blockages and clean the filters. Wash the filters with warm water (40°C max) and leave for 24 hours
or until fully dry before replacing into the machine.
Filters require cleaning at least every 3-6 months (depending on the level of use).
Don’t use your vacuum cleaner without all the filters in place.
TIP
Don’t over fill the dirt
container to avoid blocking
the air flow through the
vacuum cleaner and replace
filters every 6-9 months.
U86-FN_Pe_FlairEasy-Store_UG_[J2543]_Amd_01.07.14.indd 10-11
01/07/2014 14:15
