background image

3

Vax Careline 

0870 606 1248

safety information

2. Safety Information

FOR HOUSEHOLD USE ONLY. 

When using the vacuum cleaner, basic safety precautions
should always be observed, including the following:
1.

Only use the vacuum cleaner indoors on dry surfaces.

2.

Turn off the vacuum cleaner controls before
connecting to or disconnecting from the mains
supply.

3.

Always unplug the vacuum cleaner before connecting or
disconnecting the vacuum hose.

4. 

Close attention is necessary when used by or near
children. Do not allow children to use as a toy. 

5. 

Use only as described in this manual. Use only the
manufacturer’s recommended attachments.

6. 

Do not use the vacuum cleaner with a damaged cord
or plug. Do not use the vacuum cleaner if it has been
dropped, damaged, left outdoors or dropped into
water. Return the vacuum cleaner to a Vax
Authorised Service Agent or suitably qualified person
for examination, repair or adjustment.

Call 0870 6061248 for your nearest service centre.

7. 

Do not pull or carry by the cord. Do not use the cord
as a handle, close a door on the cord or pull the cord
around sharp edges or corners. Do not run the
vacuum cleaner over the cord. Keep the cord away
from heated surfaces.

8. 

Do not handle the plug or vacuum cleaner with wet
hands. Do not use outdoors or on wet surfaces.

9. 

Do not put any objects into openings. Do not use
with any openings blocked and do not restrict air
flow. Keep all openings free of dust, lint, hair or
anything that may reduce airflow.

10. Keep hair, loose clothing, fingers and all parts of the

body away from openings and moving parts.

11.  Do not pick up hot coals, cigarette butts, matches or

any hot, smoking or burning objects.

12. Do not pick up flammable or combustible materials

(lighter fluid, petrol, kerosene, etc) or use in the
presence of explosive liquids or vapours.

13.  Do not vacuum up harmful or toxic material 

(chlorine bleach, ammonia, drain cleaner, etc).

14.  Do not vacuum up hard or sharp objects such as glass,

nails, screws, coins, etc.

15.  Do not use without the filters in place.

16.  Use extra care when vacuuming on stairs.

17.  Keep vacuuming area well lit.

18.  Store the vacuum cleaner indoors in a cool, dry area.

19.  Turn off the switch before unplugging.

20. Use only CE-approved 13 amp extension cords. Non-

approved extension cords may overheat. Care should
be taken to arrange the cord so that the cord cannot
be pulled or tripped over.

WARNING: 

Always switch off and unplug the

vacuum cleaner from the electrical outlet before

assembling, opening or emptying the dirt container, or
before connecting/disconnecting the attachments.

CAUTION:

The vacuum cleaner is a very powerful

unit. Before plugging the cord into the outlet make

sure the switch is in the ‘off’ position. Hold the vacuum
cleaner firmly when starting and in use.

IMPORTANT:

If the inlet or hose is blocked, switch

off the vacuum cleaner and remove the blockage(s)

before re-starting the vacuum cleaner.

IMPORTANT:

Cleaning filters improves vacuum

performance. Make sure all filters are replaced back

into the vacuum cleaner before using. Vax recommends
cleaning the pre-motor filter every month and the exhaust
filter every 9-12 months. 

This vacuum cleaner is intended for household use only
and not for commercial or industrial use.

PLEASE KEEP THESE INSTRUCTIONS
FOR FURTHER USE.

!

!

!

!

Motor Thermostat

IMPORTANT:

The motor is equipped with a thermal

cut-out. If for any reason, the vacuum cleaner should
over-heat, the thermostat will automatically turn the
unit off. Should this occur, unplug the vacuum cleaner
from the electrical outlet and turn off the switch.
Remove the dirt container and empty. Clean the
filters. Allow the cleaner to cool for approximately one
(1) hour. To re-start, plug into an electrical outlet and
switch back on.

Vax V-041 User Guide.qxd  30/11/06  16:16  Page 3

Содержание Everyday Turbo V-041HS

















Отзывы: