www.vax.co.uk
10
Replacing the Belt or Brushbar
Slide the belt on to the motorshaft (Fig.7/4).
Place the new belt in the area of the brushbar without
bristles (Fig.7/5).
With the new belt in place, pull and slide the brushbar into
the nozzle, making sure that the end caps are in the
correct orientation (Fig.7/6a). Rotate the brushbar
manually to make sure the belt is properly aligned (Fig.7/6).
Re-attach the nozzle guard (Fig.7/7).
Secure by aligning the three (3) tabs in the base slots
(Fig.7/8).
Replace all three (3) screws to secure the nozzle guard.
Refer to Fig.7/1 for screw positions.
Fig.7/7
Fig.7/8
Fig.7/3
a
Fig.7/6
Fig.7/4
Fig.7/5
rotating brushbar removal and replacement
Vax V-041 User Guide.qxd 30/11/06 16:16 Page 10
