9
user guide
troubleshooting
6. Troubleshooting
W
WA
AR
RN
NIIN
NG
G:: TO REDUCE RISK OF PERSONAL INJURY UNPLUG VACUUM CLEANER BEFORE SERVICING
PROBLEM: Cleaner won’t run
Cause:
Not properly plugged into electrical outlet.
Solution:
Plug cord in firmly.
Cause:
No electricity in wall outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to on.
Cause:
Motor thermostat tripped.
Solution:
Reset motor thermostat (see page 3).
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up
Cause:
Full or clogged dirt container.
Solution:
Clean dirt container.
Cause:
Wrong pile height setting.
Solution:
Adjust setting on carpet height adjuster.
Cause:
Clogged nozzle.
Solution:
Remove obstruction.
Cause:
Clogged dirt inlet.
Solution:
Remove power head cover and remove obstruction.
Cause:
Clogged hose.
Solution:
Remove obstruction.
Cause:
Broken belt.
Solution:
Replace belt.
Cause:
Hose not inserted fully.
Solution:
Push hose in securely.
Cause:
Dirty filters.
Solution:
Clean/change filters.
Cause:
TurboTool clogged.
Solution:
Remove blockage ( see page 7)
PROBLEM: Accessories won't pick up
Cause:
Accessories not attached correctly.
Solution:
Refer to section 5 for fitting information.
PROBLEM: Cleaner picks up moveable rugs or pushes too hard
Cause:
Wrong pile height setting.
Solution:
Adjust setting on carpet height adjuster.
PROBLEM: Brushbar does not turn
Cause:
Broken belt.
Solution:
Replace belt.
Cause:
Belt installed incorrectly.
Solution:
Check belt.
PROBLEM: Air flow restricted with attachment use
Cause:
Attachment use restricts air flow.
Solution:
Check attachment.
Cause:
New carpet debris clogging air path.
Solution:
Remove obstruction.
!
!
!
!
Vax VEU-01_02 User Guide.qxd 16/4/07 13:46 Page 9