6
vax.co.uk
5
Attach the TurboTool holder to
handle. Then fit the TurboTool to
the TurboTool holder.
Attaching the TurboTool holder
1
2
Lie vacuum cleaner on its back
exposing brush bar
Align Hard Floor Adaptor with base
of vacuum cleaner, push until its
clicks into place
Using the Hard Floor Adaptor
Apply the Hard Floor Adaptor for optimum results on hard floors.
The Hard Floor Adaptor can be used on any floor setting.
How to Use
How to Use
Twist the upper cord wrap to fully
unwrap the cord then plug the
unit into the electrical socket and
turn on.
Place foot on the on/off button to
switch the vacuum cleaner on.
Place foot on the vacuum to
recline the vacuum body as
desired.
Operating the appliance
IMPORTANT:
Vax recommends
that you raise the height of
the brush bar to the hard floor
position when using this cleaner
on lino and hard floor due to
constant rotation. Vax cannot be
held responsible for damage to
these surfaces if the consumer
fails to take notice of this
recommendation.
Select a floor height setting by adjusting the
brush bar height.
High – long carpet pile.
Low – short carpet pile.
Hard floors – see ‘Using the Hard floor adaptor
