Emptying the water tank
With the water tank removed from the
appliance, gently pull one side of the
water tank handle to detach from the
water tank cover.
Pull and remove the other side of the
handle from the cover.
Lift and remove the cover from the
water tank.
Rinse the tank under water and wipe
dry with a clean cloth.
Refit the water tank cover and the
handle to secure cover into place.
IMPORTANT:
Do not leave water stored in the water tank between uses.
Always switch the appliance off and unplug from the mains when removing or refitting the water tank or filter,
and before carrying out any maintenance or troubleshooting checks.
IMPORTANT:
Do not attempt to remove the float from inside the tank.
When the water tank is full or incorrectly fitted, the LED light on the front of the appliance will flash. The appliance
will operate for several minutes and then shut down. The LED light will continue to flash.
Emptying the water tank
Using the release handles pull either
side of the water tank and remove
the water tank from the back of the
appliance.
Carry the water tank carefully by the
handle. The water tank cover is not
detachable.
Empty the water tank over a sink and
rinse tank. Wipe the outside of the tank
with a clean dry cloth and refit tank.
Taking care of your machine
Taking care of your machine
