Getting to know your machine
Getting started
Assembling your upright slim vacuum cleaner
Line up the connector on
the reach wand with the
Powered Head. Push the
reach wand down onto
the Powered Head until it
clicks into place.
Push the handheld down
onto the reach wand until
it clicks into place.
The vacuum is not free
standing and in between
uses must always be placed
in the wall bracket, or laid
fl
at on the
fl
oor in a suitable
location, so it does not
become a trip hazard or
can be stepped on.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Model Number
VX66
Name
Vax Cordless Blade Pet
Battery voltage
21.6V
Run time
Up to 35 minutes*
Charge time
4 hours
Weight
2.9 kg
Dust bin capacity
0.3L
Technical Speci
fi
cation
Subject to technical change without notice.
Turn o
ff
brushbar on hard
fl
oors. Images are illustrative only.
To purchase consumables and accessories, please visit
vax.com.au
*Brushbar and Boost o
ff
Before you begin
CAUTION
: Always switch o
ff
the vacuum cleaner before connecting or disconnecting the handheld/attachments
or removing and emptying the dirt container.
For best cleaning results,
fi
lters require cleaning at least every 3 months and should be replaced every 12 months
depending upon use.
Lithium-Ion battery safety features
• Over charge protection
• Over load protection
• Short circuit protection
• High/low temp protection
• Deep discharge protection
CAUTION
: This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance
always lie
fl
at on the
fl
oor in a suitable location so it does not become a trip hazard or can be stepped on.
Battery level indicator
Dirt container lid
Dirt container release button
Reach wand
Powered Head/
accessory release clip
Powered Head
Brushbar
Dirt container
Handheld release button
On/O
ff
button
Handle
Boost mode on/o
ff
button
Brushbar on/o
ff
button
Charging port
Filter cap
Battery level gauge
Battery level indicator
Charger Speci
fi
cation
Battery Speci
fi
cation
Accessories
&
Consumables
Charger model no.
ZD12D250060AU
Input
100-240V ~ 50/60Hz 0.5A Max
Output
25V
600mA
Use with Li-ion Battery 24BTBT3V1 ONLY
Type
Lithium-ion rechargeable battery pack
Battery model no.
24BTBT3V1
Voltage
21.6V
Rating
2.0Ah 43.2Wh
Use with E-TEK model ZD12D250060AU
Charger ONLY
Powerhead Speci
fi
cation
Model no.
FT3V1B2
Wattage
30W
Voltage
21.6V
Powerhead to be used ONLY
with Vax VX66
Filter pack
Model No. VX63F
