![background image](http://html.mh-extra.com/html/vax/clsv-vpka/clsv-vpka_user-manual_856687015.webp)
SAFETY GUIDE
13
Pull the brushbar out from the
brushbar housing.
Using a coin, turn the brushbar lock
anticlockwise to release the brushbar.
To remove any threads or hair slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove. Clear any dirt/debris inside
the housing of the floorhead.
CAUTION: If the brushbar in the mini motorised pet tool has been obstructed, the brushbar motor
protection sensor may activate. The brushbar will stop and the machine may switch off. To reset
remove the tool from the reach wand/handheld and clear any obstruction. Wait 1 minute before
refitting the tool, switch the machine on and press the brushbar ON/OFF button.
Check the inlet for any blockages and use
a blunt object to remove the blockage.
Refit the brushbar and turn the brushbar lock clockwise to lock.
Cleaning and maintenance
Removing and cleaning the mini motorised pet tool brushbar