5
filters/ cleaning blockages
WARNING :
To reduce the risk of electric shock, the power cord must be
disconnected before performing maintenance/ troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical outlet.
!
Cleaning the Pre- Motor Filter
Cleaning the Post- Motor Filter
NOTE :
This is located at the base of the vacuum cleaner.
8. Cleaning Blockages
Cleaning Debris from the Turbo Tool
(Some models only)
NOTE :
Switch the cleaner off and disconnect the power plug from the electrical outlet.
Removing debris from the TurboBrush
(Some models only)
24
24
The brushbar will stop rotating if it is blocked during operation by vacuuming up
foreign objects, or if strands of carpet are wrapped around it.
Switch the vacuum cleaner off and disconnect the power plug from the electrical
outlet.
Lay the TurboBrush floor head on a flat surface and turn over to expose the
brushbar. Using a pair of scissors, cut through any threads or hairs caught by the
brushbar that have wrapped around the guides.
Hose Blockages
The flexIble hose may be disconnected from the vacuum
cleaner. Carefully remove any blockages found and
reconnect hose securely.
Accessory Blockages
Remove accessory from hose handle/ tube. Carefully
remove the blockage and return to the cleaner.
TAP
TAP
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:08 Page 5
