vax.co.uk
4
dirt container & filters
6. Dirt Container: Maintenance
Emptying the Dirt Container
Cleaning the Cyclone Separator
When the cyclone separator has been cleaned and dried completely, re-attached the dirt container to the lid of the
separator and return the dirt container to the unit.
7. The Filters: Maintenance
CLICK!
CLICK!
IMPORTANT :
Always switch off and unplug the
vacuum cleaner from the electrical outlet before
removing the Dirt Container.
IMPORTANT :
Do NOT use the vacuum without ALL
of the filters in place.
NOTE:
Do not use any detergents or boiling water to wash
the filters.
IMPORTANT:
Remove the Dirt Container from the
unit and dispose of the dirt inside the container
before cleaning.
IMPORTANT :
The cyclone separator should not be
submerged in water.
!
!
!
!
Vax recommends that the pre- and
post-motor filter should be checked and
cleaned periodically depending on the
frequency of use and the volume of dirt
being picked up on each occasion.
NOTE :
Both Pre- and Post-Motor Filters
can be rinsed in warm water (max 40°C).
Allow to air dry for 24 hours before
replacing. Do NOT use any detergents or
boiling water to wash the filters.
Once completely dry, return the pre-
motor filters and case to the vacuum
cleaner. Replace the pre-motor filter
cover before restarting the vacuum
cleaner.
IMPORTANT:
Your vax vacuum cleaner is fitted with high performance filters it is essential
that these are well maintained and cleaned according to the following instructions.
!
Vax C90-M1/C90-MVX Series User Guide v2.0.qxd:UG 28/7/10 12:08 Page 4
