![background image](http://html.mh-extra.com/html/vax/c89-ma-series/c89-ma-series_user-manual_856642008.webp)
vax.co.uk
7
Looking after your machine -
Removing Blockages
Clearing blockages
Hose blockages
Accessory blockages
Locking ring
Tabs
Removing blockages from the TurboTool (some models only)
Remove accessory from the hose/telescopictube. Carefully remove the blockage and return to the cleaner.
Turn the TurboTool over
and slide off the locking ring.
The flexible hose may be disconnected from the vacuum cleaner. Carefully remove any blockages found and
reconnect the hose securely.
Detach lower housing
and remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the
groove to finish.
Lay the Turbobrush floor head on a flat surface and turn over to expose the brushbar. Using a pair of scissors,
cut through any threads or hairs caught by the brushbar that have wrapped around the guides.
Removing blockages from the Turbobrush (some models only)
WARNING:
To reduce the risk of electric shock, the power cord must be disconnected before performing
maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket.
IMPORTANT:
If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove
the blockage(s) before re-starting the vacuum cleaner.