16
support.vax.co.uk
MAINTENANCE & CLEANING
Removing dirt/debris from the TurboTool
CAUTION:
To reduce the risk of injury remove the tool from the machine before performing maintenance or troubleshooting.
Always ensure the machine is switched off and unplugged before doing so.
Refit the bottom cover, insert
and tighten the screws.
Pull open the bottom
cover. Clean out any
debris or hair from the
brushbar and turbine fan.
Checking for blockages
Press the hose end clips
and pull to remove the 2
hoses from the hose holders.
Pull and stretch the hose,
any blockage in the hose
should then be visible.
Using a blunt instrument,
push into the stretched
out hose to remove the
blockage.
Press the dirt container release buttons located on the
side of the carry handle, pull to remove the dirt container.
Open the TurboTool by
removing the 2 screws with
a crosshead screwdriver.
DIRT
CONTAINER