Taking care of your machine
Unclip the dirt container lid
to open.
Remove the post-motor
filter by unclipping it from
the body of the vacuum.
IMPORTANT:
The exhaust filter is designed to offer long life with no maintenance. The filter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as this
will damage the delicate filter media.
Cleaning the pre-motor filter
HEPA post-motor filter maintenance
Lift lid to access filter.
Check the post-motor filter
for discolouration.
Remove filter.
Tap
Tap filter clean.
Wash in water 40˚C max and leave
for at least 24 hours or until dry
before replacing into the machine.
24hr
40°C
max
IMPORTANT:
The pre-motor filter requires cleaning at least every three months.
Do not use your vacuum cleaner without all of the filters in place.
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automati-
cally turn the unit off. For further help go to the ‘
What to do if it goes wrong’
page.
