Place fingers under the
catch of the bin to dirt
container lid and pull to
release it.
Press dirt container
release button to remove
the dirt container.
24hr
MAX
40˚C
Cleaning the shroud
Taking care of your machine
Let’s talk technical
Remove the pre-motor
filter to allow access to
the shroud.
Remove the exhaust cover
by turning it counter clockwise
and lifting it off. To find the
post-motor filter.
Tap the shroud over the
bin to release dirt.
Wash the shroud under
running water and leave
to dry. The shroud will need
to be placed back correctly.
Remove the filter.
Always switch off and unplug the
vacuum cleaner before carrying
out any maintenance.
IMPORTANT
Removing blockages from the TurboTool*
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
Removing debris from the brushbar
Vacuuming the stairs
Switch off your vacuum
cleaner at the main socket.
Using a pair of scissors
cut any hair or debris free
from around the brushbar.
Ensure that the vacuum
is upright at the top or
bottom of the stairs while
vacuuming.
Do not lean on the machine
while using the hose.
*Not applicable for all models.
The exhaust filter is designed to offer long life with no maintenance. The filter should be checked periodically and
when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as this will damage the
delicate filter media.
HEPA post-motor filter maintenance
Check the post-motor filter
for discolouration.
MAX
40˚C
!
MAX
40˚C
Remove the rubber ring.
Detach lower housing
and remove blockages.
Using a pair of
scissors cut any hair
or debris free from
around the brushes.
Line up the tabs on front of
housing and push together
to re-fit. Slide the rubber
ring into groove to secure.
U86-AB_e_Series_Action_802_UG_[J2543]_Amd_02.07.14.indd 10-11
02/07/2014 13:47