7
Vax Careline
0870 606 1248
dirt container and filters
5. Dirt Container & Filters:
Removal & Replacement
Removing the Dust Cup Assembly
CAUTION: Always unplug the unit from the
electrical outlet before removing and emptying
the dust cup. Failure to do so, may result in electric
shock or personal injury.
To ensure that your vacuum continues to clean
thoroughly, the dust cup should be emptied after each
use and/or each time it reaches the “MAX” fill line.
To remove the dust cup assembly, press the dust cup
release button and remove the dust cup assembly
(Fig.5/1).
WARNING: Do NOT push the cyclonic chamber
bottom door release button while the cyclonic
chamber is still attached to the dust cup.
To empty the dust cup, hold the dust cup assembly over a
garbage container and press on the dust cup bottom door
release button (Fig.5/2).
Separating the Dust Cup from the Cyclonic Chamber
Remove the dust cup assembly.
While holding the dust cup assembly, twist the carrying
handle counter clockwise to separate the cyclonic
chamber from the dust cup (Fig.5/3).
Cleaning the Dust Cup & Cyclone Shroud
To remove the cyclone shroud:
Hold the dust cup in one hand and with the other hold the
cyclone shroud. Twist the cyclone shroud counter
clockwise to unlock and remove from the dust cup (Fig5/4).
Take out the cyclone shroud and rinse it in lukewarm
water by just running it under the tap to remove any dust
that is adhering to the screen (Fig.5/5).
Do NOT place in dishwasher. Allow the cyclone shroud to
air dry completely (24 hours) before reinstalling into the
vacuum.
The dust cup can be washed in lukewarm water. Do not
use strong detergents (Fig.5/6).
!
!
Fig.5/1
Fig.5/4
Fig.5/5
Fig.5/2
Fig.5/3
Press
Hold from
the bottom
Hold
and
twist
Cyclone
shroud
