11
12
5. Add / View / Delete a Camera
1) Press Menu button, select through -> -> to add a camera.
2) Select through -> to view a camera.
·
If there are 2 or more cameras, tap to cycle through the added
cameras every 15 seconds.
·
Select the camera number (1/2/3/4) to view the corresponding camera.
3) Select through -> to delete a camera. At least one camera shall be
added. Do not delete all the cameras. If necessary, please add a new camera
before deletion.
You can switch viewing different cameras; the current camera
number will be shown with the Camera icon on the monitor.
You can only select one camera to view at one time.
6. Digital Zoom & Circulating
Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third
pressing of the button will restore to the original image.
Press and hold OK Button 4 seconds to start auto circulating, press OK
again to stop.
7. Pan-n-Tilt
When viewing the camera, press Left / Right / Up / Down Button to view at
different angles, 108 degrees vertically and 270 degrees horizontally.
When the monitor is mute, you may not be able to hear the baby.
· When the timer is set, the Alarm icon will be shown on the monitor.
· Before setting, please check that the monitor time is your current
time.
8. Night Vision
The night vision is automatically activated in a dim environment. The camera
has 12 high-intensity infrared LEDs for picking up clear images in the dark.
Black and white images can be captured within 2m distance.
9. Alarm
Press Menu Button -> Right Button to locate Alarm menu -> OK Button ->
Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or 6Hr
alarm, or set the hour and minute otherwise. When the alarm time is reached,
a beep will be heard. Press OK Button to stop; otherwise it’ll keep beeping for
30s, beeping again in 1min, stops after it’s alerted 3 times.
10. Wide-angle Viewing (Optional)
Install your wide-angle lens (separately sold) referring to the previous
mounting wide-angle lens section. Now you can view the camera in a wider
angle of about 170 degrees.
11. Temperature Alert
The monitor will prompt too high (>35°C / 95°F) and too low (<0°C / 32°F)
temperatures with the “HH” and “LL” icon, accompanied with a & icon
and a beep alert.
· To mute the sound during poor monitor-camera connection, please
set the system sound volume to mute.
· When the monitor screen is under sleep mode, the power indicator
flashes green slowly while the audio is still on; press any button to
awake. You can also short press the Power Button to turn the screen
off.
· Press and hold the Power Button to power on / off the monitor.
The current zoom level number will be shown with the Zoom icon
on the monitor
2