05
06
GETTING STARTED
1. Charging & Powering Baby Monitor
1) Connect the monitor adapter to the monitor and a power outlet.
2) Unplug the unit when its power indicator turns off, indicating a full charge.
3) Press the Power button on the monitor to power on with the power indicator
lighting green.
2. Powering Camera
1) Connect the camera to power source via the Micro-USB cable and
camera adapter.
2) Slide the Power Switch on camera to power on. Make sure the power
indicator light is green.
· Only use the power adapters included in the package.
· Do not place the camera and power cord within the reach of your
baby.
It’s strongly recommended to use a screw and screw anchor. Don’t
release the camera until you’re sure it is firmly mounted.
· Once they’re paired successfully, the camera number with icon
will be shown at the top left.
· Microphone feedback might occur when the monitor is too close
to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is recommended to pair in the baby's room, or wherever you
intend to place the camera.
3. Pairing the Baby Monitor & the Camera
By default, one camera has been paired with the monitor when manufactured.
When you power on the monitor and camera, the two will automatically pair.
To add more cameras, press the Pair Button at the bottom of the camera,
press Menu button, select through -> -> , and then the monitor will
auto-pair with the camera.
4. Placing the Camera
Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.
5. Wall Mounting Camera
1) Select the spot to mount the camera, keeping it beyond your baby’s reach.
2) Insert the screw (not included) pre-installed on wall into the mounting hole
of the camera.
1
1.5-2m / 4.
9-6.6ft