Vauxhall Meriva, Инструкция по информационно-развлекательной системе

Страница: 77 / 101

76 Infotainment system
Recognition works best, if a pause of
at least half a second is made after
every three to five digits. The
Infotainment system then repeats the
numbers recognised.
You can then enter further numbers
or the following commands:
■ "Dial": the inputs are accepted.
■ "Delete": the number last entered or
the block of numbers last entered is
deleted.
■ "Plus": a preceding "+" is entered
for a call abroad.
■ "Verify": the inputs are repeated by
the voice output.
■ "Star": An asterisk "*" is entered.
■ "Hash": A hash "#" is entered.
■ "Help"
■ "Cancel"
The maximum length of the telephone
number entered is 25 digits.
To be able to make a call abroad you
can say the word "Plus" (+) at the
beginning of your number. The plus
allows you to call from any country
without knowing the prefix for calls
made abroad in that country. Then
say the required country code.
Example of a dialogue
User: "Dial"
Voice output: "Please, say the
number to dial"
User: "Plus Four Nine"
Voice output: "Plus Four Nine"
User: "Seven Three One"
Voice output: "Seven Three One"
User: "One One Nine Nine"
Voice output: "One One Nine Nine"
User: "Dial"
Voice output: "The number is being
dialled"
Entering a name
Using the "Call" command
a telephone number is entered that
has been stored in the telephone
book under a name (voice tag).
Commands available:
■ "Yes"
■ "No"
■ "Help"
■ "Cancel"
Example of a dialogue
User: "Call"
Voice output: "Please, say the
nametag to call"
User: <Name>
Voice output: "Do you want to call
<Michael>?"
User: "Yes"
Voice output: "The number is being
dialled"
Starting a second call
A second call can be started during an
active telephone call. To do so, press
the button
w
.
Commands available:
■ "Send": activate manual DTMF
(touch-tone dialling), e. g. for voice
mail or telephone banking.
■ "Send nametag": activate DTMF
(touch-tone dialling) by entering
a name (voice tag).
■ "Dial"
■ "Call"