Vauxhall Cascada, Руководство пользователя

Страница: 118 / 263

116 Lighting
Vehicles with Xenon headlight
system
1. Key in ignition switch.
2. Pull turn signal lever and hold
(headlight flash).
3. Switch on ignition.
4. After approx. 5 seconds the
control indicator
f
starts flashing
and an acoustic signal sounds.
Control indicator
f
3
94.
Every time the ignition is switched on,
f
flashes as a reminder for approx.
4 seconds.
To deactivate, operate the same
procedure as described above.
Control indicator
f
will not flash when
function is deactivated.
Daytime running lights
Daytime running lights increase
visibility of the vehicle during daylight.
They are switched on automatically
when ignition is on.
If the vehicle is equipped with
automatic light control function, the
system switches between daytime
running light and low/high beam
automatically, depending on the
lighting conditions and information
given by the rain sensor system.
Automatic light control
3
113.
Adaptive forward lighting
The Adaptive forward lighting
functions are only available with Bi-
Xenon headlights. Light range, light
distribution and intensity of light are
variably triggered depending on the
light conditions, weather and road
type.
With the light switch in position
AUTO all lighting functions are
available.
The following functions are available
also with light switch in position
9
:
● dynamic curve lighting
● cornering light
● reversing function
● dynamic automatic headlight
levelling
Playstreet lighting
Activated automatically at low speed
up to approx. 20 mph. The light beam
is turned at an angle of 8° to the
roadside.
Town lighting
Activated automatically at a speed
range between approx. 25 and
34 mph and when street lights are
detected by the light sensor. The light
range is reduced by an extended light
distribution.