Vauxhall 2013 Combo, Руководство пользователя

Страница: 140 / 193

136 Self-help, vehicle care
4. Screw the compressor air hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the tyre in such
a way tha t the sealant b ottle is up rig ht.
6. Remove the v alve cap from the defective
tyre.
7. Screw the filler hose to the tyre valve.
8. The sw itch on the compressor must be
set to § .
9. Plug the compressor connector into the
ac cessory socket or the cigarette lighter
socket. Accessory socket
3 59.
10.Switch on ignition.
To prevent battery discharge, we
recommend that you lea ve the engine
running.
11. Set the rocker switch on the com pressor
to I . The tyre is filled with sea lant.
12. While the sealant bottle drains (a pprox.
30 seconds) the pressure ind icator on
the com pressor briefly points to 87 psi
(6 bar). Pressure then sinks again.
13. All of the sea la nt is pump ed into the
tyre. Afterwards, the tyre is filled with
air.
14. The presc rib ed tyre pressure should be
reac hed within 10 m inutes. Tyre
pressure
3 115, 3 179. Switch off the
compressor when the correct pressure
is obtained.