Vauxhall 2012 Agila, Руководство пользователя

Страница: 113 / 137

112 Vehicle care
Position jack at the front or rear
jacking point located nearest to
the wheel concerned so that the
jack claw spans the vertical base.
Make sure it is properly
positioned, ensuring the jacking
bar fits securely into the jack head
groove.
The jack base must be on the
ground directly below the jacking
point in a manner that prevents it
from slipping.
5. Rotate jack handle clockwise
using the attached wheel bolt
wrench to raise vehicle.
Raise the vehicle until the wheel
is just clear of the ground.
6. Unscrew wheel bolts completely
by turning anti-clockwise and
wipe clean with a cloth.
Put wheel bolts somewhere
where the threads will not be
soiled.
7. Change the wheel.
8. Screw in the wheel bolts.
9. Lower vehicle.
10. Install the wheel wrench ensuring
that it locates securely and tighten
each bolt in a crosswise
sequence. Tightening torque is
85 Nm.
11. Align the valve hole in the wheel
cover with the tyre valve before
installing.
12. Stow the replaced wheel
3
112
and the vehicle tools
3
105.
13. Check the tyre pressure of the
installed tyre and also the wheel
bolt torque as soon as possible.
Have the defective tyre renewed or
repaired.
Spare wheel
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel
3
108.
The spare wheel can be classified as
a temporary spare wheel depending
on the size compared to the other
mounted wheels and country
regulations.
The spare wheel has a steel rim.