Vauxhall 2009 Corsa Скачать руководство пользователя страница 37

Страница: 37 / 211

Seats, restraints

Seat folding

Lift release lever and tilt backrest

forwards. Lower release lever and

backrest engages in lowered position.

Slide seat forwards.
To return the backrest to its original

upright position: First slide seat back

and it will engage in its original

position. Lift the release lever, move

the backrest upright, lower the

release lever, backrest engages.
Folding the backrest forwards is

possible only when the backrest is in

an upright position.

Do not operate handwheel to adjust

backrest with backrest tilted forward.

Corsa VXR

Remove seat belt from belt mount on

backrest.
Pull release lever on rear of backrest

and tilt backrest forwards. Release

lever and backrest engages in the

lowered position. Slide seat forwards.
To return the backrest to its original

upright position: First slide seat back

and it will engage in its original

position. Pull release lever, move

backrest upright, release lever,

backrest engages.

Folding the backrest forwards is

possible only when the backrest is in

an upright position.
Do not operate handwheel to adjust

backrest with backrest tilted forward.

Heating

Activate heating by pressing

button

for the appropriate seat with the

ignition on.
LED in button

on: relevant front

seat heating on.
Seat heating is operational when the

engine is running.

Содержание 2009 Corsa




















































































































































































































Результаты поиска

Содержание 2009 Corsa

Отзывы:

Похожие инструкции для 2009 Corsa

Бренды по названию

Популярные бренды

Vauxhall 2009 Corsa, Руководство пользователя

Результаты поиска

Содержание 2009 Corsa

Отзывы:

Похожие инструкции для 2009 Corsa

Бренды по названию

Популярные бренды