background image

C3

2

32

13

D

Pan head screws 

4.0 x 20 mm

Rail

Front frame

Bracket

Bracket

Screw 

4.0 x 8 mm

door overlap

Cabinet width Basket width

450 mm

350 mm

500 mm

400 mm

600 mm

500 mm

Locking clip

Plastic clip

Front frame

Baskets table

We reserve the right to make technical changes and to improve product specifications.

8

Fit front frame

Mark or pre-drill the holes for 
the bottom bracket for the front
frame such that the distance 
between the bottom edge of 
the front and the bottom hole is
the same as dimension "C" as 
per table B. The position of the 
top plastic bracket is 
dependent on the installation 
height. The distance "D" is to 
be found in table B. Caution: if 
the dimension "A" was correc
ted under point 7, then the 
dimensions "C" and "D" must 
be offset by the same amount!
Now push the plastic brackets 
into the front frame as per the 
drawing and secure in the 
frame with a screw - during this
process take into account the 
corresponding cabinet width.
Push the front frame guides 
onto the rollers on the rails. 
Screw the plastic brackets to 
the front.

Fastening material:

Pan head screws 4.0 x 20
(not included)
Fastening screws 4.0 x 8

Fit the baskets

The plastic clip (the clips are 
symmetrical) is clipped into the
holes on the sliding frame. The 
baskets are now hung on the 
sliding frame with the top wire 
on the side rail in the plastic 
clip. The height of the baskets 
can be adjusted by moving the 
clips. The wire hooks on the 
(trapezoid-shaped) baskets on 
the front frame are hung in the 
slots on the front frame. Then 
fit the basket locking clips 
above the hooks and secure.

Table B

Installation

Dimension

Dimension

heights

"C"

"D"

DUSA 1

650 -

950

499

DUSA 2

950 - 1200

819

DUSA 3 1200 - 1450

1059

DUSA 4 1450 - 1700

47

1219

DUSA 5 1700 - 1950

1619

DUSA 6 1900 - 2150

1619

DUSA 7 2150 - 2350

1619

+ door overlap

+ door overlap

Please note:

The cabinet must be securely fastened to the wall to prevent it from tilting.
Appropriate fixing material is not supplied with the cabinet.

Vauth-Sagel SYSTEMTECHNIK 
GmbH & Co.KG
Neue Straße 27
D-33034 Brakel-Erkeln
Tel.  +49-52 72/6 01-01
Fax. +49-52 72/6 01-193
www.vauth-sagel.de
e-mail: [email protected]

door overlap

Содержание Dusa Series

Страница 1: ...et width depth height 365 110 60 Installation dimensions Heights DUSA 1 650 mm 950 mm 2 baskets DUSA 2 950 mm 1200 mm 3 baskets DUSA 3 1200 mm 1450 mm 4 baskets DUSA 4 1450 mm 1700 mm 4 baskets DUSA 5 1700 mm 1950 mm 5 baskets DUSA 6 1900 mm 2150 mm 5 baskets DUSA 7 2150 mm 2350 mm 7 baskets Finish Fitting RAL 9006 silver clear varnish Baskets chrome RAL 9006 silver clear varnish Damping available...

Страница 2: ... 170 mm from the front edge of the cabinet to the middle of the top Fastening material not included Pan head screws 4 0 x 16 or Euro screws 6 3 x 13 3 Fit coupling arms top bottom When fitting the coupling arms it is to be ensured that the straight coupling arm is fitted at the top and the bent coupling arm is fitted at the bottom The brackets for the coupling arms are with 110 hinges to be fasten...

Страница 3: ...e same as dimension A as per table A The position of the top plastic bracket is dependent on the installation height The distance B is to be found in table A If there are fouls with existing front hinges then the dimension A will need to be adjusted as appropriate Caution this situation must also be taken into account in point 8 Fit front frame Now place the rails in the plastic brackets and conne...

Страница 4: ...ame guides onto the rollers on the rails Screw the plastic brackets to the front Fastening material Pan head screws 4 0 x 20 not included Fastening screws 4 0 x 8 9 Fit the baskets The plastic clip the clips are symmetrical is clipped into the holes on the sliding frame The baskets are now hung on the sliding frame with the top wire on the side rail in the plastic clip The height of the baskets ca...

Отзывы: