OPERATING MANUAL 3200 DVR V6.4/20-EN
Page | 5
6.
Installation / end of work
Preparing the gun for the first start-up: Screw in the compressed air connection
and tighten it firmly using a 13 mm open-end wrench or ring spanner, if
necessary glue it in place.
Start-up: Unscrew the pressure container. Pierce the protective foil of the 1 litre
can and place it in the pressure container. Then dip the riser pipe into the me-
dium and screw the gun with the container lid onto the pressure container
hand-tight. Do not use any tools for this! Plug the connection nipple of the hose
(type 3900 or 3901) onto the quick coupling and let it engage. Connect the gun
to the compressed air supply via the quick coupling of the air connection. By
pressing the trigger you put the pressure cup gun into operation.
Attention:
Wear heat-resistant gloves when using heated
medium. Danger of burns!
The spray pattern can be influenced by the following factors::
Material quantity via stop screw/nozzle need
Adjusting the intake pressure (optional)
Distance between hand spray nozzle and object
Angular position of the hand spray nozzle to the object
End of work: Vent the pressure container using the exhaust air valve (pos.24).
Disconnect the device from the compressed air supply after each use. Clean the
device according to the instructions given in point 7.
Attention:
Never operate the trigger while the container is under pres-
sure but the pressure cup gun is not connected to the com-
pressed air source. This can push the medium into the air ducts
and render the pressure cup gun unusable!
7.
Maintenance and care
Clean the compressed air device after each use. Fill the pressure container with
cleaner and flush the pressure cup gun and the hoses by putting the device into
operation. We recommend benzine or commercially available turpentine-based
detergents. Do not use aggressive cleaning agents! Observance of the mainte-
nance instructions will ensure a long service life and trouble-free operation for
this quality product.
Attention:
Pay attention to a proper disposal of the residues, which arise
during the maintenance and care.
