Vauni Globe, Руководство пользователя

Страница: 34 / 56

34 |
Vauni Globe © Copyright 2020 Vauni AB - All rights reserved
ENG
• Try to extinguish the fire by moving the regulator lid toward the hearth’s opening until it stops.
• If this has no effect, the hearth should primarily be allowed to burn out – provided that the flames stay
inside the hearth and do not reach the inner side of the globe.
• If the flames are so strong that the hearth cannot be allowed to burn out, it must be extinguished with a
hand-held fire extinguisher. For more information about suitable models of fire extinguisher, contact the
rescue service (in Sweden, www.raddningsverket.se).
The regulator lid does not fit tightly against the burner disk
Possible causes:
• The regulator lid is wrongly positioned.
• A foreign object is present between the regulator lid and the burner disk.
• The regulator lid and/or the burner disk is dirty.
Measures:
• Position the regulator lid according to the instructions in Section 3.1 Assembly and installation.
• Remove any foreign objects.
• Lift off the regulator lid and clean it. If necessary, also clean the burner disk and the burner opening.
The hearth leaks after fuel is added
Possible causes:
• The burner is over-filled.
• A leak has arisen in the burner system.
• The fuel has expanded in a warm state – the burner is over-filled
Measures:
All parts of the burner system are made of high-quality stainless steel and carefully checked against leakage
before delivery. If a leak is observed or suspected, the hearth must immediately be extinguished and not used
until the fault is fixed.
• If the burner has been over-filled, excess fuel must be removed by following the instructions in Section
4.2.3.
• If the burner system leaks, the hearth must not be lit under any circumstances. Contact the place of
purchase for the nearest service workshop.