2
IMPORTANT SAFEGUARDS
WARNING:
This product can expose you to chemicals known by the State of California to cause cancer
and birth defects or other reproductive harm .
Wash hands after handling.
LASER SAFETY
Pointing a laser and interfering with the operation of an aircraft is
a felony punishable by fine and imprisonment.
The laser guide used in the tool is Class II.
The laser shall be used and maintained in accordance with the
manufacturer’s instructions.
The use of optical instruments with this product will increase eye
hazard.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation ex-
posure.
Do not stare into the laser beam.
Never aim the beam at any person or an object other than the
work piece.
Avoid indirect exposure via reflective surfaces, such as glass and mirrors.
Store out of reach of children.
Equipment should be in a high location or locked up to keep out of reach
of children . It is not a toy .
Do not tamper with the laser output.
Changing the performance of the laser to increase its output is
prohibited . Any claim for damages or injuries resulting from not following these instructions will be refused .
Never operate laser if the unit is defective or the cover or seal is damaged.
There are no user-serviceable parts in the laser device.
The laser unit must be returned to the
factory for any service or repair . Service or repair must be handled by authorized factory-trained technicians .
Be careful with this tool.
Striking or jarring it, especially on the laser housing, can affect its accuracy .
TOOL USE AND CARE
Use the product only as specified in this manual.
Avoid exposing this device to EMF (electro-magnetic fields) from arc welders, induction
heaters, etc. OR exposing to static electricity.
To prevent sensor damage, do not point the sensor lens directly at the sun or any other
source of strong infrared light.
AVOID EXPOSURE
DIODE LASER CLASS II LASER PRODUCT
Alltrade Tools LLC Made in China
1 MW MAX OUTPUT
AT 630-680 nm
2 in. - 100 ft. (51 mm - 30.48 m)
LASER RADIATION-DO NOT
STARE INTO BEAM
MK7-30 (692527)
LASER RADIATION IS EMITTED
FROM THIS APERTURE
VISIBLE LASER RADIATION-DO NOT
STARE INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CAUTION
Laser Distance Measure Label
