SPACE 2P 11
Engli
SH
4.
Insert the cordless end of the long poles into the respective channels
(b)
.
Then tense the poles and insert into the respective base sections
(C)
.
Erecting only the outer tent:
insert the ends of the poles into the base of
the outer tent and tense the poles
(C1)
. Continue with point 5.
Erecting only the inner tent:
insert the poles into the base of the inner
tent and tense the poles
(C2)
. Beginning in the centre, fasten the inner
tent onto the poles
(C3)
.
5.
Insert the ridge pole into the appropriate plastic eyelets, front and back
(D)
, and fasten the hooks located inbetween to the pole
(E).
6.
Anchor the tent corners, the porch and, where necessary, the guy ropes.
7.
Ensure there is sufficient ventilation. The porch and air vents provide
various options for this.
TAkE Down – gEnErAl inSTrUCTionS:
•
Remove everything from the tent’s interior.
• Freestanding tents can be gently shaken out to remove leaves, sand, and
other debris.
• Turn the tent over with floor facing upward and allow it to dry a bit longer.
• If it’s not possible to dry the tent completely before packing it, this should
be done within 12 hours to prevent the risk of mold and mildew growth.
• As in the tent set up, never pull the poles out of the pole sleeves; rather
push them through.
• When storing a tent in its stuff sack, make sure that stakes and poles don’t
press against the tent fabric and damage it.
• Before taking down your tent, close all zips and roll up the guy lines.
That way you won’t have to untangle them when it comes time to set the
tent up again, and pitching is that much easier.
DiSmAnTling – “moDEl-SPECifiC”:
1.
Remove the tent pegs.
2.
Remove first the ridge pole and then the main poles.
3.
Fold up the poles and roll them up with the tent, if possible. Do not force
the poles into the storage bag if it is full as this may result in damage to the
storage bag and tent.
GAL_TENT_Space_2P.indd 11
08.08.2011 11:56:47
