Vauconsant A62608, Руководство пользователя

Страница: 7 / 12

USER MANUAL
Vauconsant SA, all rights reserved A622xx & E633xx -rev0-ENG, 2/12/2010 - 7 -
Cleaning
Always take care to switch off the appliance with energy doser before cleaning. This unit is not
impermeable to water. Do not use a high pressure water jet to clean it inside or out.
Every day:
•
Metal surfaces:
Stainless steel should be cleaned with soapy warm water or a special product for high quality
metal surfaces. Never use abrasive sponges or etching agent to avoid scratching the surface.
•
Glass (breath shield):
All glass displays must be cleaned using a high quality glass cleaning product and clean cloth.
Never use abrasive sponges or etching agent to avoid scratching the surface.
Diagnostic
Symptoms Possible causes Remedies
No electricity supply Check the general circuit breaker
Burnt fuse Check the fuse in the electric cabling
Orange light off
No heat
Faulty supply Check the supply cable
Defective toughened glass
plate
Replace the toughened glass plate
Orange light on
No heat
Cable disconnected or cut
Check and test electricity input to the toughened glass
plates
Halogen bulb burnt Replace the bulb with one of equivalent power
A halogen lamp
does not come on
Supply of this defective
halogen
Check supply of halogen
No electricity supply Check the general circuit breaker
Burnt fuse Check the fuse in the electric cabling
Faulty supply Check the supply cable to the heating display
None of the
halogen lights
come on
Defective switch Check the switch, replace it if necessary
NB
•
Bulbs should be replaced with bulbs of equivalent power. (see the Spare Parts section)
•
Fuses should be replaced by gG fuses of the same caliber.