USER MANUAL
Vauconsant SA, all rights reserved A622xx & E633xx -rev0-ENG, 2/12/2010 - 6 -
•
Controls:
The controls are placed on a removable panel to the right of the unit.
o
An energy doser with orange on-off light for the toughened glass plate or plates.
o
A switch with orange light for the heating display option.
Commissioning / Use
•
Commissioning:
Pre-heating of toughened glass plates 30 minutes before use.
The heating display should be switched on at the start of service.
•
Use:
Toughened glass
Turn the energy doser button to the right, set it to the maximum position. This position maintains
the temperature of food above 63°C which is the minimum temperature defined by the hygiene
department.
To maintain this temperature, it is indispensable to heat food to a temperature between
+70°C and +80°C.
GN A/A gastronorme trays should be 65 mm deep.
The temperature of the heating tops may be set from 40°C to 110 °C.
Heating display (option)
Press the switch
Position 0: Off
Position 1: On
IMPORTANT / WARNING
•
It is imperative not to add containers with a temperature above 160°C to avoid
weakening and breaking the plate.
•
If the surface of the toughened glass plate is cracked or has just broken, immediately
switch off the electricity supply to the energy doser that controls the plate
•
Toughened glass heating plates are shock-sensitive.
