Vatech PaX-Primo, Руководство пользователя

Страница: 83 / 98

81
z
Confirm voltage frequency and power consumption meet the requirement specified on
the equipment.
z
Make sure that the equipment is well grounded.
7.5 General Notes
7.5.1 Preoperational stage
1. Check the very basic things like switch contact and polarity and cable conditions are
met with requirement.
2. Equipment ground condition is satisfactory.
7.5.2 In-use stage
1. Keep always eyes on the patient and equipment during operation to make sure
something wrong might happen.
2. If so, stop operation immediately and care must be taken to correct problems.
3. In case of equipment malfunctioning, there are few things that can be done on the field
except for replacing fuses. Do not make wild guess to jump into wrong decision. Always
ask help from the manufacturer for the further information.
4. Never try to revise equipment, including wires or cables. There is nothing that can be
changed on the field. By doing so, it can cause problems that may be beyond the repair.
7.6 X-Ray generation and warning
1. Use the extended cable, while taking image, to make operators less susceptible to X-
Ray source.
2. This equipment is made dental service and generates X-Ray safely.
But inappropriate handling may do the patient and operator harm.
Thus the unauthorized never try to operate this equipment, let alone to repair.
3. The operators have all the responsibilities to check conditions of equipment regularly.
This is well defined in the code of manual and in internal education session.
4. Any means of warning signal should be employed to keep patient and operator on alert
when something unexpected happens.
5. For the pregnant and the patient having needs for particular attention, consult with
medical doctor before taking images.
6. Always keep in mind that all the requirements and conditions specified on the
international law should be applied for installing and using this kind of X-Ray equipment.