Vatech EzRay Air VEX-P300, Руководство пользователя

Страница: 44 / 104

4. Operation
36
EzRay Air Portable
(Model: VEX-P300) User Manual
Charging the Battery
1. Connect the battery charger to the battery charger connector, as shown in the
following figure.
2. When the battery charger is connected, the battery charging LED indicator light
comes on. Charge the battery until all the three LED indicators are filled up.
Usually, it takes about 3 hours to charge the battery after a
complete discharge fully.
3. When the battery charge is completed, remove the battery charger from the
device.
It is not able to perform an exposure while the battery charger
is connected to the device.
Battery Use Cycle
The battery is a consumable part. It is expected to degrade gradually, so it should be
recharged more frequently. When the battery duration decreases to half or less than
half compared to when the battery was new, contact your Service Representative to
get a new battery.
To check how to replace the battery, see ‘Battery Replacement.’