VASTEX VDC-513610 Скачать руководство пользователя страница 3

Assembly 

1) 

Unpack your drying cabinet and remove the (4) lag screws (with a 7/16 socket) holding it down to 

the skid. Open the doors and remove the wrapped Shelves, the Center Tree, and any other items inside. 

3)

  Clean the inside thoroughly, first vacuuming then wiping down with a damp cloth. This should be 

repeated several times after turning on the unit to allow any trapped dust to be removed. 
 

NOTE: Debris left in the chamber will contaminate screens and cause the image area to 
develop pinholes.  

2) 

Slide the drying cabinet off the skid and install the (4) casters at each corner of the machine. You 

may need another person to help install the casters while one lifts the cabinet. Tighten the casters down 
with 3/4” box wrench or a 3/4” socket.  

4) 

Unwrap the shelves and wipe them clean. Be sure to wipe shelves off with a wet rag to get rid of 

any dirt on them. Install shelves onto the Center Tree and inside walls of the drying cabinet. Install the 
shelves as shown.  

5) 

It is recommended that the exhaust be ducted outside to remove fumes and moisture from the work 

environment.  Do not exceed (1) elbow (90 deg.), and/or 8 feet of straight duct. 

In the event this must 

be exceeded, a duct fan (booster) must be added to ensure proper airflow.

  If it is not exhausted to 

the outside, make sure the elbow provided is used and pointed to the ground to restrict light from enter-
ing the cabinet. 

Shown w

ith door r

emoved 

& 20x24

 screens i

nstalled 

Center Tree 

Controls 

Intake air filter 

Casters 

NOTE: Be sure all 3 tabs of each shelf are properly seated! 

— 

Power users:

 

For shops that want to have the fastest dry times with a full cabinet, it is highly rec-

ommended that you add a booster fan to the exhaust. This will draw the most amount of air through the 
cabinet and will decrease dry times.  
— 

Humidity is a big factor in dry times:

 

If your region is very humid, you should consider using 

your Dri-Vault in an air conditioned room. If that is not an option, added a dehumidifier next to the in-
take of your Dri-Vault would decrease dry times and increase efficiency of your drying cabinet. 

2

Содержание VDC-513610









Отзывы: