Print head Stop Bar
(14-02-010-0)
Screen Leveling Lock Bolts:
Loosen 1/4 turn to adjust the front to rear pitch. Re-tighten after pitch is adjusted.
Screen Leveling Knob:
After loosening the Screen Leveling Lock Bolts, turn knob clockwise to pitch the front of the
screen up, and counter-clockwise to pitch the front of the screen down.
Stop Bar:
DO NOT remove unless removing entire print head. This bar stops the Print Heads in the up position
Lifting Springs:
The coil springs hold the Print Head up, and pull tension for the micro adjustments.
Moving Point Spring Bracket:
4 Positions for spring. Higher point = more lifting force.
Micro Adjustment Locking Knobs:
Loosen 1/4 turn to make micro adjustments. Retighten when complete.
Side Micro Knob:
(red) Controls side to side micro adjustment.
Left & Right Micro Bolts:
Rotates the screen several degrees in either direction and moves screen front to back.
Off Contact Locking Bolts:
Must be loosened slightly to make Off Contact adjustments.
Off Contact Adjusting Screws:
Used to level and set the distance between the screen and pallet.
Print Head Overview:
The V-1000 Printers utilize floating print heads. When the print heads are lowered they lock into a Wheel
Lock Housing. This effectively disengages the print head from the “C” hub and precisely aligns it to the
pallet. The floating print head will only function properly if screens are set with off contact from pallets.
DO NOT remove unless
removing entire print head.
CAUTION !!
High spring pressure.
Component Identification / Print Head
Note: For Micro Registration, loosen the Micro Adjustment Locking Knobs slightly before
making screen adjustments. Check that locking knobs are tight before setting off contact.
Clamp Bar Knob
(2) 04-05-250
Off Contact/Pitch
Screws
(2) 04-05-200
Side Micro Knob
04-05-191
Screen Clamp
14-02-005-1
Micro Locking Knobs
(2) 04-05-106
Off Contact and Left/Right
Pitch Locking Bolts
(two bolts not visible in this view)
(2)04-05-324 + (2)04-05-065
Micro Washer
04-02-011-0
Lifting Spring
(2) 04-07-014
Lock Plate
14-02-028-0
Screen Leveling
Knob (Pitch)
04-05-155
L/R Micro Knobs
(2)04-05-325
Micro Knob Bracket
14-02-031-0
Screen Leveling Lock Bolts
(2) 04-05-324
Hinge
14-02-002-1D
Moving Point Spring Bracket
Pg.6
