1)
First, tighten the pallet arm locking knob. Take
a reading from a level placed on the bottom
of the pallet arm.
2)
Move the level to the top of the pallet towards
one side. Adjust the pallet to match the read-
ing taken from pallet arm. Move the level to
the opposite side and adjust to the pallet arm
reading. Recheck both sides after making
adjustments.
Make these readings match
3)
Turn level and take a reading on the pallet arm in
the other direction.
4)
Move the level to the top of the pallet towards
one side. Adjust the pallet to match the read-
ing taken from pallet arm. Move level to the
opposite side and adjust to the pallet arm
reading. Recheck both sides after making
adjustments.
Make these readings match
Note: Recheck level readings in all directions throughout the leveling process. After the
pallet is level to the pallet arm, tighten all nuts.
An Improperly leveled pallet may not be flat. Loosen the bolts and re-level the pallet to
eliminate any possible warping of the pallet.
Pallet Adjusting Nuts
Note: Level only one pallet with the following procedure and mark this pallet as #1.
Then level all print heads to this pallet. See Print Head Leveling for instructions.
Pallet Leveling
1
2
3
4
Pg.14
