sure that the supply cord never comes into contact with the hot parts of the appliance.
5)
The appliance must be unplugged:
-before cleaning and maintenance procedures
-if it is not working properly
-as soon as you have finished using it
-if you leave the room, even momentarily
6) Caution: Never use your appliance with wet hands or near water contained in bath tubs,
Showers, sinks or other containers.
7)
When using the appliance in the bathroom, unplug it after use as the presence of water
nearby may pose a danger even when the appliance is turned off.
8)
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
9)
Children should be supervised to ensure that that they do not play with the appliance.
10)
Do not use if the cord is damaged, the power cord must be replaced by the manufacturer, its
after-sales service or a person with similar qualifications, to avoid all danger.
11)
Stop using your appliance and contact an Authorized Service Centre if:
-your appliance has fallen
-it does not work properly
12) Your appliance can only be repaired using special tools.
13) Do not immerse or put under running water, even for cleaning purposes.
14) Do not hold with damp hands.
15) Do not unplug by pulling on the cord, rather pull out by the plug.
16) Do not use an electrical extension lead.
17) Do not clean with abrasive or corrosive products.
18) Do not use at temperatures below -5
℃
and above 35
℃
.
19) Your appliance is designed for household and professional use. Any inappropriate use or
failure to comply with the instructions, the manufacturer accepts no responsibility and the
guarantee will not apply.
III.
GETTING STARTED
Your appliance gets warm very quickly (takes just 2-3 min) and the temperature remains
stable throughout use:
-
TO FILL WATER tank
WARNING: Avoid water shortages when opening spray switch
- Remove tank from unit. Open rubber tank cap and fill. The device is designed to use
distilled water. Replace rubber cap and snap back onto unit.
- Plug in the appliance
- Open lock button
- Select the ideal temperature for your hair using the temperature switch 160-220
℃
）
- wait for 2-3 min, the appliance will be ready to use.
-According to the need to open or close the spray switch: can spray or stop.
