1
www.vanracking.com.au - issue02
LADDER RACK
FITMENT
MAX LADDER LOAD: 40KG.
Parts list:
Item
Part
2.6m
Step
3m
Kit
1a
Left Rail Assembly - VA-001
0
1
2a
Right Rail Assembly - VA-002
0
1
1b
Left Rail Assembly 2.6m - VA-006
1
0
2b
Right Rail Assembly 2.6m - VA-007
1
0
3
Front End Cap LH - C108
1
1
4
Front End Cap RH - C109
1
1
5
Rear End Cap LH - C110
1
1
6
Rear End Cap RH - C111
1
1
7
End Cap Screw3x8 - F037
8
8
8
Rear Roller End Cap L - C112
1
1
9
Rear Roller End Cap R - C113
1
1
10
M8x16 Button Screw - F016
4
4
11
M8 Flat Washer - F017
8
8
12
M8 Spring Washer - F018
4
4
13
M8 Hex Nut - F045
4
4
14
Ladder Hoop - C180
2
2
15
M8x20 Hex Screw - F046
4
4
16
M8 Nyloc Nut - F042
4
4
17
Roller 470mm - VA-003
0
1
18
Roller 680mm - VA-005
1
0
19
Locking Tabs - C097
12
12
20
M8x25 Hex Combination Bolts -
VA-004
12
12
21
M8 Channel Nut
12
12
1 - Small phillips head
screwdriver.
2 - 5mm allen key
3 - 13mm spanner
4 - Tape Measure
5 - 13mm socket
wrench (for ladder lock)
Important information:
- Narrow and heavy loads are to be carried near the crossbar mounts.
- Loads which overhang shall conform to any relevant state laws.
- Check tie down strap tension every 50kms as loads can shift and resettle
- Do not use elastic straps to secure a load.
- Specialised equipment carriers for specifi c products should always be used. I.e Ladder rack.
Note:
The handling characteristics of a vehicle will change when a carrier system is fi tted. Driving techniques should be altered to allow for these changes,
reducing speed, cornering and allowing longer braking distances.
- Roof bars can be removed when not in use.
- Store spare ladder lock key in a safe place.
- Always store lock in housing to avoid damage to vehicle.
-
The key must be inserted in the lock and turned clockwise to both open and close the ladder lock.
1.
2.
3.
4.
19.
5.
17/18.
6.
15.
8.
10.
20.
16.
9.
12.
14.
13.
11.
8/9.
11.
21.
