background image

 

6 / 9 

The installation of the device has to be built and constructed in a way that it can hold 10 

 installation 

den. 

ation another time. 

as to make sure that safety-relating and machine-technical installations are 

 

tallations are 

 

Proced

The device should be installed outside areas where persons may walk by or be seated. 

ing 

 

erty. 

 

ional trussing systems 

have to be used. The device must never be fixed swinging freely in the room. 

 

Caution: Devices in hanging installations may cause severe injuries when crashing down! 

If you have doubts concerning the safety of a possible installation, do NOT install the 

 

Mount the device to your trussing system using an appropriate clamp. 

 

 

times the weight for 1 hour without any harming deformation. 

 

When rigging, derigging or servicing the device staying in the area below the

place, on bridges, under high working places and other endangered areas is forbid

The operator has to make sure that safety-relating and machine-technical installations are 

approved by an expert before taking into operation for the first time and after change

before taking into oper

 

The operator h

approved by an expert after every four year in the course of an acceptance test. 

The operator has to make sure that safety-relating and machine-technical ins

approved by a skilled person once a year. 

ure: 

 

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, includ

(but not limited to) calculating working load limits, installation material being used, and

periodic safety inspection of all installation material and the device. If you lack these 

qualifications, do not attempt the installation yourself, but instead use a professional 

structural rigger. Improper installation can result in bodily injury and or damage to prop

 

The device has to be installed out of the reach of people. 

If the device shall be lowered from the ceiling or high joists, profess

device! 

 

Before rigging make sure that the installation area can hold a minimum point load of 10 

times the device's weight. 

 

 

Отзывы: