Varytec LED Pad Bar Compact ST RGB, Руководство пользователя

Страница: 31 / 56

In this mode, you can manually set a constant colour pattern for all LEDs. This setting is only
relevant if the device is not controlled via DMX.
Press
[MENU] repeatedly until the display shows ‘CoLo’ .
Use [UP] or [DOWN] to select the submenu ‘r.xxx’ . Confirm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour red for all LEDs in a range from ‘r.000’ … ‘r.255’ .
Confirm with [ENTER] . The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set the strobe speed in
a range from ‘S.001’ (slow) to ‘S.099’ (fast). Confirm again with [ENTER] to apply the setting.
Use [UP] or [DOWN] to select the submenu ‘G.xxx’ . Confirm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour green for all LEDs in a range from ‘G.000’ … ‘G.
255’ . Confirm with [ENTER] . The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set the strobe
speed in a range from ‘S.001’ (slow) to ‘S.099’ (fast). Confirm again with [ENTER] to apply the
setting.
Use
[UP] or [DOWN] to select the submenu ‘b.xxx’ . Confirm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour blue for all LEDs in a range from ‘b.000’ … ‘b.255’ .
Confirm with [ENTER] . The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set the strobe speed in
a range from ‘S.001’ (slow) to ‘S.099’ (fast). Confirm again with [ENTER] to apply the setting.
Constant colour pattern
Operating
LED Pad Bar Compact ST RGB
31